DIO-3460
The DIO-3460 is a space-saving industrial I/O module. It provides for save cable connections due to the use of WAGO Cage Clamp connectors rather than screw terminals.
- Hardware Watchdog
- WAGO Cage Clamp connectors
- Windows 10, Linux, 32/64-bit
Features
- 12 Relay Outputs
- 12 Optocoupler Inputs
- High Retention USB connector
Applications
- Industrial I/O
- Safety Circuits
Overview
The DIO-3460 is a space-saving industrial I/O module. It provides for save cable connections due to the use of WAGO Cage Clamp connectors rather than screw terminals (which, even if properly torqued at installation time, might loosen, especially whenever there are vibrations or significant changes of temperature).
A high retention USB connector allows for 50% more retention force than the standard USB preventing accidental disconnect.
Software
Application software can read the state of input ports and control the state of the relay outputs.
Integrated watchdog functionality opens all relay contacts if the communication with the controlling application program is broken, or an internal firmware stuck has been detected.
Specifications
Input Data
Maximum Input Voltage: ±30V (DC/rms AC)Input: Logic L ≤ +-0.8V, Logic H ±5V … ±24V, (±0.5mA … ±3mA)
Relay Output Data
Warning:Switching inductive and/or capacitive loads create voltage and/or current peaks, which may damage the relay. Protective circuits need to be used.
Rated Power (any DC combination of V/A not to exceed their individual limits):
≤ 10W
Switching Voltage (DC or peak AC): ≤ 200V
Switching Current (DC or peak AC): ≤ 0.5mA
Carry Current (DC or peak AC): ≤ 1A
Contact Resistance (@0.5V/50mA): ≤ 1mOhm
Breakdown Voltage across contacts (DC across contacts, according to EN60255-5 ):
≥ 250V
Operating Time (incl. bounce; measured with w/ nominal voltage): ≤ 0.5ms
Release Time: ≤ 0.1ms
Supply Voltage (USB): 5V ± 5%
Supply Current (USB): 180 mA max.
Isolation (USB to I/O)
Creepage distance (PCB design): ≥ 3.2 mmBreakdown Voltage (Relays, contact to coil): 4.25kV DC, 3kV rms AC
Isolation Voltage (Optocouplers): 2.5kV rms AC, 60 seconds
Environmental and Physical
Size (including connectors): 105 mm W x 113 mm H x 32 mm DWeight (net, including connectors): 160 g
Operating ambient temperature: 0 … 50°C
Storage temperature: -20 … 80°C
Relative humidity: 5 … 95%, non-condensing
USB connector: Extraction force ≥ 15N, Mating force ≤ 35N
Ordering info
DIO-3460 - Adapt or (excluding connectors, no USB cable), Software Download Card
DCK-3460 - Connector Kit with 6 connectors WAGO 733-108 and USB cable (1m length)